Titanium - титановый слиток

Manufacture and supply of titanium slabs and titanium ingots ASTM Grade 2; ASTM Grade 3, ASTM Grade 4; Ti6Al/4V; ASTM Grade 5; ASTM Grade 9 We offer you having familiarized with output and supply of titanium slabs, titanium ingots of Fiko Electron-Beam Metallurgical plant and also with range of supplied titanium slabs and ingot of Fiko and with shorten technology of titanium slabs and titanium slab melting and also titanium ingots. Titanium slabs and titanium ingots or titanium slab or ingot can be produced and supplied as: a) CP (commercially pure) titanium slabs and ingots which are allotted to titanium slabs and ingots, titanium slab and ingot with low oxygen content 0.04-0.08% and with alloyed oxygen and iron content as per ASTM Grade-1; ASTM Grade-2; ASTM Grade-3, ASTM Grade-4. b) titanium slabs and ingots with ligature supplement i.e.titanium slabs and titanium ingots from alloys. Titanium slabs and ingots with ligature supplement melted according to ASTM Grade-1; ASTM Grade-2; ASTM Grade-3, ASTM Grade-4; ASTM Ti6Al/4V; ASTM Grade-5; ASTM Grade-9, titanium slab and titanium ingot, titanium slabs and titanium ingots according to GOST VT6, Ti6AL/4V, VT20, VT20, VT23, OT4, OT4-0, OT4-1, VT1-0, VT1-00, VT8, VT9, VT25, VT14, VT15, 2 VT, 3M, VT16, VT3-1, VT5, VT5-1, PT3V, SP3V, PT7M, PT1-M, Grade1, Grade2, Grade5, VT18, VT18U, Alloy 14, Alloy19, Alloy27, Alloy40, Alloy37, AlloyTS6, AT3, AT6. c)Titanium slabs and ingots, titanium slab and ingot are manufactured in different diameters. FIKO metallurgical plant produced titanium ingots dia 370mm, dia 400mm, and dia. 630mm. At present a new melting facility is being constructed which aimed to melt titanium ingots dia 800mm, 860mm. But if it requires titanium bars including titanium-forged bars, titanium turned bars dia.450-650mm so it is necessary titanium ingot dia. 800, 860mm for manufacture of abovementioned titanium bar. Fiko Electron-Beam Metallurgical plant supplied following titanium slabs upon customer request: a) titanium slabs and titanium slab b) titanium slabs and titanium slab Titanium slabs and titanium slab can be supplied both turned and not turned. Fiko Electron-Beam Metallurgical plant will have possibility to melt slabs of nearly 12 000 kg mass. It is the same situation with titanium ring, titanium flanges, titanium disks, titanium squares, and titanium billets. Depending on diameter of titanium ring, titanium flange, titanium disk, titanium square or titanium billet it is taken corresponding diameter of titanium ingot or the specific size of titanium slab. In case titanium ring, titanium flange, titanium disk, titanium square or titanium billet have to have mechanical properties so titanium slab or titanium ingot do not suit for them we should manufacture them from titanium bars both forged titanium bars and hot rolled titanium bars. 3. Titanium slabs and ingots are produced in different lengths. We melted titanium ingots with length 1000mm and more. The new facility will be able to melt titanium ingots up to 4000mm in length. Titanium slabs and titanium slab is subdivided into following: a) titanium slabs or titanium slab by width b) titanium slabs or titanium slab by thickness c) turned or not turned titanium slabs 4. Titanium slabs and ingots, titanium slab and ingot are produced in different weight. The weight of titanium ingots produced by us before weighted 700 to 3200 kg. With new melting furnace we will have possibility to melt ingots of nearly 12 000 kg mass. The main parameters of titanium slabs and ingots, titanium slab and ingot depend on market demands. For production of titanium bars the most suitable will be titanium ingot dia 370mm, for rolling of titanium sheets and titanium plates the ingots with dia 630-860mm are the best choice. Moreover titanium sheets and plates are better manufactured from titanium slab and titanium slabs. The market dictates to manufacturer of titanium slabs and ingots that it’s cause repartition of consumption market of titanium slabs and titanium ingots: a) titanium slab and titanium slabs will be used only for production of titanium sheets and plates b) titanium slabs force out titanium ingots from production market of titanium sheets and plates c) titanium ingots take niche only for production of titanium bars, titanium tubes where titanium slabs cannot be used d) titanium slabs and ingot have common market of repartition- this is titanium ring, titanium billets, titanium flanges, titanium disks. Depending on their parameters titanium slabs or ingots or titanium slab and ingots could be used for production. Very often customer require titanium ingots Ti6Al-4V dia 200-250mm. Usually, such titanium ingots are used in production of titanium golf clubs instead of more expensive titanium bars. Depending on materials sizes customer needs different titanium slabs by width and length. For example, Japanese manufacturers of titanium materials-titanium sheets, plates and also sheets in coil need different titanium slabs by width and length. So they manufacture titanium sheet in coil 600mm and more. For this reason they need different size slabs by width. Such titanium slab is needed for Japanese and Italian manufacturers for production titanium coil sheet. Globalization forces manufacturers of titanium slabs to specialize in production of titanium slabs by width or to have various crystallizers for production titanium slabs in depend on market of coil sheet and in the end the exact sizes of titanium slabs will be produced. FIKO’s new melting facility is also purposed for melting titanium slabs. Titanium slabs will be produced in following dimensions height of titanium slab - 400-500 mm width of titanium slab - 1050-1325 mm length of titanium slab - 4000 mm Titanium slabs will be supplied either in turned (machined) con